Have you recently purchased a Fischer heater with the added benefit of WiFi control? Here is a step-by-step guide to show you how to set it up. It’s easy to do, trust us!
If you do have any difficulty, feel free to call our technical support team on 0800 103 2723 for further advice.
1. Connect the Tydom device to your internet router via an Ethernet cable and also to a power source using a plug socket.
2. Download the Tydom app from the Apple App Store/Google Play Store. On the Tydom app, enter the last 6 digits of the MAC address (this can be found on the reverse of the modem). Make sure NOT to download the Tydom HD app.
3. The app will then prompt you to pick a memorable password. This needs to be 8 characters including numbers and letters and memorable to the end user (you).
4. Click login/connect. Your smartphone is now connected to the modem.
1. Firstly, set the receiver to association mode by pressing and holding the button and releasing as soon as the light starts to flash. The light will then continue to flash by itself. This is now in association mode.
2. Turn the thermostat off. The only thing showing on the screen should be a letter “i” and the standby button.
3. Now, press and hold the second button from the left until it reads “tAP” in the centre of the screen.
4. Press okay and it will now say “P00” in the centre and a moving bar below it.
5. The third digit in represents how many receivers the thermostat has located. Wait until the number has changed to represent how many heaters you are trying to set up. Eg, “P01” for 1 heater etc.
6. Once it has located all of the receivers, press ok. Ok will only appear once it has found the heaters.
7. It will then show you the wattage of the heater in the top left of the screen. Set this to the correct wattage of your heater and press okay again.
1. Firstly, set the receiver to association mode by pressing and holding the button and releasing as soon as the light starts to flash. The light will then continue to flash by itself. This is now in association mode.
2. Navigate to the main screen of your app and press the menu button in the top left of the screen, indicated by three horizontal lines.
3. Press “My Devices,” followed by “Add a Device.”
4. Scroll down to the bottom of the list that has now appeared and select the receiver and thermostat which are listed as “Minor 1000.”
5. Now, press to associate. The app will begin to search for your heater.
6. Eventually, it will tell you it found the heater and ask if you would like to add more. If yes, select yes and repeat the steps above. If no, select no and your system is now set up.
7. Sit back, relax and enjoy the comfort and efficiency of your Fischer heaters.
Unlike the Fischer wireless thermostats, there is no separate option to set the time and date.
In order to do this, turn the dial to the “prog” setting. The time will then show on the screen. Adjust the hour, press okay. Adjust the minutes, press okay. Now, the date will show (dd/mm). Adjust the day, press okay. Adjust the month, press okay.
When in the off position, press and hold the “i” button until a padlock symbol appears.
The thermostat is then locked and the user can only look at the auto page when thermostat is switched on. To unlock, simply turn the thermostat off and hold the “i” button again until the padlock disappears.
If you need any further assistance setting up your Fischer WiFi control, please call our technical support team on
0800 103 2723
- How Much Does It Cost To Switch: Gas to Electric Heating? - December 1, 2021
- Fischer Reviews - January 12, 2022
- The Future is Electric, The Future is Fischer… - January 26, 2022