Aquafficient Eco + Air Source Water Heater

Aquafficient Eco+ Air Source Water Heater

Easy Replacement For Your Existing Cylinder

The Aquafficient Eco+ is our brand new air source water heater, designed to provide hot water to your home quickly and efficiently. Using air as its main energy source; the AquafficientEco+ is an efficient hot water solution that will replace your existing cylinder. It also has an automatic anti-legionella system.

Get Your FREE Catalogue

The Future Is Renewable with Air Source Water Heaters

Air is all around us, so utilising it to heat your water is a smart decision. The Aquafficient Eco+ uses the warm air in your home to provide your hot water. A refrigerant is compressed, enabling the transfer of heat to the water in the Aquafficient Eco+ system, so you can enjoy water heated to up to 60°C. This convenient, and eco-friendly, air source water heater is the perfect solution to home energy efficiency and is up to two to three times more energy-efficient than a conventional water cylinder†, making this the perfect hot water cylinder replacement.

The Aquafficient Eco+ requires minimal maintenance. As an added benefit; a single 1.5 kW robust, titanium heating element is also built-in as a backup, meaning you will never be without hot water.

†Source: Department of Energy, USA

Made in Spain

Renewable Technology

5 Year Manufacturer Warranty

Saving Energy

The Aquafficient Eco+ is a sustainable heating solution, proven to reduce energy consumption which can make a real difference to those energy bills. The table below shows an energy use comparison with a 210 litre water cylinder with a 3kW immersion heater. Switching to an Aquafficient Eco+ could reduce your energy use by a third.‡

The reduction in energy usage with the Aquafficient Eco+ is down to the ‘Coefficient of Performance’ (COP) of the unit, which means for every 1 unit of electricity you use, you receive at least 3+ units of heat

You can simply multiply the annual kWh usage by your current electricity tariff to calculate an estimated running cost, however any figure calculated is for illustrative purposes only and is not guaranteed.

‡Figures based on one charge per 24-hour period to heat 200L of water. Figures for Aquafficient and Aquafficient Eco+ based on testing carried out by Fischer Future Heat, 2021. Figures for 210L cylinder based on data from www.sust-it.net/immersion-heater-energy-calculator.

Hot water system energy consumption estimates - Fischer

Just One Socket: The 13amp Water Heater

With a power requirement of less than 10amps, the Aquafficient Eco+ requires only a standard 13amp socket to install. This 13amp air to water heater unit also requires access to an external wall to install one single vent pipe to allow cool air to flow to the outside. The Aquafficient Eco+ electric air source water heater also contains an automatic anti-legionella disinfection system and the whole unit comes with a 5-year manufacturer’s warranty.******

Please find full details of our guarantees/warranties by reading our full terms and conditions.

The Possibilities Are Endless

Much like the Aquafficient, Aquafficient Eco+ can be used alongside a heating-only boiler, allowing you to both heat your home and water efficiently. You can also use Aquafficient Eco+ as a stand-alone air source water heater and hot water system, or even combine it with Fischer’s 40mm HeatCore radiators to provide everything you need. This domestic hot water heat pump available to homeowners provides incredible convenience and energy savings.

Built with a stainless steel casing, 80mm of highly efficient insulation and finished in white, Aquafficient Eco+ has a sleek, modern design perfect for any home. This versatile and modern unit can either be wall-mounted or floor-standing and is suitable for installation in all rooms including an accessible and fully insulated loft.

Power to Zero, Choose Electric.

We understand the positive impact sustainable heating has on the reduction of climate change. Sustainable living starts at home, which is why we have always worked alongside our customers to make cleaner electric heating choices available. We have made it our responsibility to pave the way from fossil fuels to zero carbon electricity. Make the switch to an electric system, powered by renewable energy from a climate conscious energy supplier. The Future is Electric.

Download Your Free Catalogue

Why Should You Book Your Free Survey?

When advising customers how to improve their home’s energy efficiency, you need a firm grasp of heat-loss calculations. Making heat-loss calculations a mandatory part of every heating installation means we will be able to recommend a heating solution that strikes the right balance between being powerful enough to meet peak demand for heat and being efficient enough to keep consumption and emissions down. As part of the survey, it is important to understand and anticipate a customer’s heating needs, so talking to our prospective customers is an important part of our process. Heat-loss calculations balance the amount of energy needed to overcome the heat loss through the fabric of your home. Every home is different so there is no ONE SIZE FITS ALL SOLUTION.

Book Your Free Survey