How keeping heating on overnight during cold weather can save you from a massive bill

How keeping heating on overnight during cold weather can save you from a massive bill


As the temperature drops during the winter, it can be tempting to turn off the heating overnight in order to save money on energy bills. However, this decision may result in costly home damage and higher bills in the long run. You can save money and prevent damage to your home by leaving your heating on overnight during cold weather.

While it may appear counterintuitive, leaving your heating on overnight during cold weather can actually lower your energy bills over time. You can avoid energy spikes caused by turning your heating on and off throughout the day and night by maintaining a consistent temperature.

In this blog post, we’ll look at the advantages of leaving your heating on overnight during cold weather and offer tips on how to do so effectively. Whether you’re in the midst of a snowstorm or simply looking to save money on your energy bills, keep reading to find out why leaving your heating on overnight may be the best choice for your home and wallet.



Understanding the Need to Keep Heating On Overnight During Cold Weather

One of the most serious consequences of leaving your heating off overnight is the possibility of frozen pipes. When the temperature falls below zero degrees Fahrenheit, the water in your pipes can freeze and expand, causing them to burst. This can lead to costly repairs and structural damage to your home. Furthermore, turning off your heating overnight can make it more difficult to maintain a comfortable room temperature, making it more difficult to sleep and leading to increased use of blankets and duvets, both of which consume energy. This type of damage can be expensive to repair and cause significant disruption in your daily life.

Furthermore, maintaining a comfortable indoor temperature can be difficult when the temperature drops too low. This can cause pain and difficulty sleeping. To avoid these issues, it’s critical to keep your home at a consistent temperature throughout the day and night.

It is recommended that you keep your home’s temperature between 18°C and 21°C during the day and between 15°C and 18°C at night to maintain a comfortable living environment. By leaving your heating on overnight, you can keep your home at a consistent temperature, avoiding any sudden temperature drops that could cause damage or discomfort.



The Benefits of Keeping Heating On Overnight During Cold Weather

Reduced Risk of Frozen Pipes:

Freezing and burst pipes can cause significant damage to your home, resulting in costly repairs and potential water damage. This is especially problematic during the colder months, when temperatures can fall below freezing. By leaving your heating on overnight, you can keep your home at a consistent temperature and keep your pipes from freezing and bursting. This not only saves you time, money, and stress in repairs, but it also protects your home from water damage, which can lead to further problems down the road.


Maintained Comfortable Room Temperature:

Sleeping in a cold room can be uncomfortable and even dangerous, resulting in hypothermia. By leaving your heating on overnight, you can maintain a consistent and comfortable room temperature, keeping you and your family warm all night. This can result in better sleep, better health, and a more pleasant living environment.


Lower Energy Bills:

Turning your heating off overnight may seem like a good way to save energy and money. However, when you turn your heating back on in the morning, your system has to work harder to warm up the cold space, which can actually use more energy and lead to higher energy bills. By keeping your heating on overnight, you can maintain a consistent temperature, which can actually be more energy-efficient and lead to lower energy bills.


Turning off your heating at night may appear to be a good way to save energy and money. When you turn on your heating again in the morning, your system has to work harder to warm up the cold space, which can use more energy and result in higher energy bills. You can maintain a consistent temperature by leaving your heating on overnight, which is more energy-efficient and leads to lower energy bills.


How to Keep Heating On Overnight During Cold Weather

Setting the Thermostat to an Optimal Temperature:

Setting your thermostat to an optimal temperature during the winter is critical to keeping your home warm and comfortable without increasing your energy bills. A temperature of 68°F (20°C) is a good starting point, but depending on the size of your home and your personal preferences, you may need to adjust this. If you’re concerned about energy consumption, you might want to install a programmable thermostat, which can adjust the temperature based on your schedule and preferences.

You can also take control of your heating with our exclusive wireless thermostat which gives you the option to set specific temperatures throughout the day. The Fischer thermostat features an internal sensor that measures the room temperature away from the heater providing greater accuracy, and warmth but only when it’s needed.


Take full advantage of room-by-room control, and never feel the cold again with the Fischer Warm Home Guarantee.**


You can also adjust the temperature settings on the Fischer Thermostat to suit your needs. Depending on your comfort level and preferences, you can set different temperatures for different times of the day. This level of control enables you to create a heating schedule that is tailored to your lifestyle and ensures that your home is always comfortable while consuming minimal energy.


Overall, the Fischer Thermostat is an intelligent and efficient way to control your home heating system. It assists in lowering energy consumption, lowering your carbon footprint, and can assist in lowering your energy bills, all while keeping your home warm and comfortable.

Insulating Your Home:

It is critical to properly insulate your home in order to keep it warm and comfortable during cold weather. Insulating your walls, floors, and ceiling, as well as sealing any draughts or gaps in your windows and doors, are all part of this process. Insulation can help your house retain heat, requiring less energy to keep it warm. Over time, this can result in significant energy savings.


Some tips for insulating your home include:


  1. Insulating your attic or loft to prevent heat from escaping through your roof: Insulating your attic or loft is one of the simplest and most effective ways to keep your home warm during the winter. Because heat rises, heat can escape through your roof and leave your home feeling cold and draughty if your attic or loft is not properly insulated. Insulating your attic or loft can help trap heat inside your home, lowering your heating bills and making it more comfortable.


  1. Sealing gaps and cracks around windows and doors with weather-stripping or caulking: Cold air can enter your home through gaps and cracks around windows and doors, making it difficult to keep your home warm and comfortable during cold weather. Weather-stripping or caulking these gaps and cracks can help prevent cold air from entering your home and reduce the amount of heat that escapes. This can help you save money on your energy bills while also making your home more comfortable.


  1. Adding insulation to your walls and floors, especially if you live in an older home:

 If you live in an older home, your walls and floors may not be adequately insulated. Insulating these areas can help prevent heat loss and keep your home more comfortable in cold weather. This is a more involved project than insulating your attic or sealing gaps and cracks, but it is well worth the effort if you want to improve the energy efficiency and comfort level of your home.


Some more information that might be useful


Repairing Dripping Taps:

If you have a dripping tap in your home, take action. Repairing this problem may help to keep water from freezing and causing further damage to your pipes. Other simple preventative measures include opening cupboard doors with pipes inside to allow warmer air to circulate and bleeding radiators. Bleeding radiators is a simple process that you can do yourself by turning the valve at the top of the radiator with a special key. The goal is to remove any air pockets from inside the unit that may be preventing hot water from flowing properly. By taking these simple precautions, you can keep your plumbing system in good working order and avoid costly repairs caused by frozen or burst pipes.


What to Do If a Pipe Freezes?

A frozen pipe can cause a blockage and prevent water from flowing. To repair a frozen pipe, slowly heat it up to melt the ice and clear the blockage. Turn on the water before thawing the pipe to encourage water flow. Use a hairdryer, warm water from a kettle, or a towel soaked in warm water to heat up the pipework. However, it is critical not to use a blowtorch, lighter, or any naked flame as this could further damage the pipework. The key is to gradually warm up the pipes and avoid pouring a kettle full of boiling water directly onto a frozen pipe, which can cause additional damage. You can safely and effectively thaw a frozen pipe and restore water flow to your home by following these steps.


What to Do If a Pipe Bursts?

If a pipe bursts in your home, the first step is to turn off the water at the stopcock to prevent further water damage. It is also critical to turn off your central heating and any other water heating installations to prevent water from flowing through the burst pipe. After that, open all of the faucets to allow the water to drain from the system. This can help to reduce the amount of water flowing through the damaged pipe, preventing further damage to your home. Finally, to avoid further damage to your belongings, move any possessions such as furniture or clothing. By taking these precautions, you can limit the damage caused by a burst pipe and get the necessary repairs completed as soon as possible.


Installing Pipe Insulation:

Insulating your pipes prevents them from freezing in cold weather and reduces heat loss in your home. The more pipework you can insulate, the better your plumbing system will be. This simple measure can help to prevent pipe damage, reduce the risk of burst pipes, and lower your energy bills. Insulation materials are typically available and reasonably priced at most hardware stores. Homeowners can protect their pipes by installing DIY wrap-around wool insulation. This is a simple and inexpensive way to keep your pipes in good condition and your plumbing system running efficiently. You can avoid costly repairs and keep your home warm and comfortable all year long by taking this preventative measure.


If you have a burst pipe or another major plumbing problem, you should contact your insurer right away. Many insurance companies have 24-hour helplines where you can get assistance at any time. Your insurer will be able to advise you on the next steps to take and assist you in arranging for professional repairs. It is critical to report the incident as soon as possible so that the damage can be minimised and further problems can be avoided. Your insurer may also be able to tell you what is covered under your policy, including whether or not you are eligible for reimbursement for repairs or replacement parts. By contacting your insurer as soon as possible, you can ensure that you receive the assistance and guidance you require to get your plumbing system back up and running as soon as possible.

Request Your FREE Catalogue

Discover our full range of electric heating products and see how our innovative and efficient heating systems can help.
Request Free Catalogue
© Fischer Future Heat UK Limited. All Rights Reserved.
Company No.: 06021954 --1
VAT No.: GB 992 691 075